http://hardkap.net/forums/ Macpup, Pritlog, Pritdeals discussion forums en Thu, 11 Mar 2010 09:24:39 +0000 http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1602 Thu, 11 Mar 2010 00:50:33 +0000 chill 1602@http://hardkap.net/forums/ <p>Hi Prit,</p> <p>It makes sense to me :) No need to do more than what is required.</p> <p>Regards,<br /> Charles </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1601 Thu, 11 Mar 2010 00:39:56 +0000 Prit 1601@http://hardkap.net/forums/ <p>Thanks Charles. </p> <p>Yes, you might be able to change it to a comma. But, then you will have to locate places in the Pritlog script where this gets used and probably change that too. My recommendation would be to leave it alone as going away from the default Pritlog code will cause trouble when you try to upgrade later. </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1600 Wed, 10 Mar 2010 23:02:59 +0000 chill 1600@http://hardkap.net/forums/ <p>Hi Prit,</p> <p>No problem. I didn't have that many to change. :) Even if I did, It still wouldn't be a problem. You can only do so much in the time you have to work on Pritlog and sometimes you can't catch everything. Heck, I'm going to have to change a hand full of nine week grades for my students because I forgot to grade some papers (oops).</p> <p>While I am posting, I was thinking about the authors file. I noticed it uses #~# as a separator and I'm wondering, can I change the separator to a comma (,)?</p> <p>Regards,<br /> Charles </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1599 Wed, 10 Mar 2010 17:26:25 +0000 Prit 1599@http://hardkap.net/forums/ <p>Hi Charles, I should have added it in the update script to automatically take care of this. Sorry for missing this. </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1598 Wed, 10 Mar 2010 17:16:52 +0000 chill 1598@http://hardkap.net/forums/ <p>hi fastidioso,</p> <p>I just figured it out when I edited a post. :) I didn't realize that Prit had put the change in 0.811 that forces you to change the problem for the tags before you can repost.</p> <p>Regards,<br /> Charles </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1597 Wed, 10 Mar 2010 17:07:26 +0000 chill 1597@http://hardkap.net/forums/ <p>hi fastidioso,</p> <p>Can you please let us know how you specifically fixed this problem: "After upgrading to 0811 tags with spaces, such as "old news", are displayed as "old.news"." I'm having the same problem too.</p> <p>Regards,<br /> Charles </p> http://hardkap.net/forums/topic/enlightenment-application-launch-error#post-1596 Wed, 10 Mar 2010 16:42:52 +0000 aen 1596@http://hardkap.net/forums/ <p>Thanks runtt21 - I'll now know what to do the next time this happens. The application was missing a library - GLU.so.1 but after further investigation, I realize my PC does not have the 3D graphics capability so the library would not make any difference. The app was easily removed with PetGet. </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1595 Wed, 10 Mar 2010 10:52:59 +0000 fastidioso 1595@http://hardkap.net/forums/ <p>Thanks for your reply.<br /> The file with the translation into Italian, you can download it from here:<br /> <a href="http://www.fastidioso.altervista.org/quaqquaraqqua/tmp/" rel="nofollow">http://www.fastidioso.altervista.org/quaqquaraqqua/tmp/</a></p> <p>Ciao all </p> http://hardkap.net/forums/topic/possible-rss-issue#post-1594 Wed, 10 Mar 2010 09:35:32 +0000 chill 1594@http://hardkap.net/forums/ <p>Hi Prit,</p> <p>I'm having the same problems with the RSS feature too. I'm upgraded to 0.811. For whatever reason, my index page is starting on line four instead of line one. And, I cannot figure out "for the life of me" why this is happening. I think the line start has something to do with the RSS feature not working for the "Subscribe to this page.." icon in the URL and the RSS Feeds link in the right menu.</p> <p>This is what the Feed Validator shows me for my RSS:</p> <p>Source: <a href="http://chills.myedublog.com/index.php/RSS" rel="nofollow">http://chills.myedublog.com/index.php/RSS</a></p> <p> 1.<br /> 2.<br /> 3.<br /> 4. &lt;?xml version="1.0" encoding="ISO-8859-1"?&gt;&lt;rss version="2.0"&gt;&lt;channel&gt;&lt;title&gt;Mr. Hill's Educational Blog&lt;/title&gt;&lt;description&gt;Mr. Hill - A K12 Web Blogger&lt;/description&gt;&lt;link&gt;http://chills.myedublog.com/index.&lt;/link&gt;&lt;/channel&gt;&lt;/rss&gt;</p> <p>I checked the index.php, the header.tpl, the main.tpl and the .tpl files in the blocks sub directory and none of them start on line 4. I see that halojoy has provided some code for the fix, but I don't know exactly what I should use since it doesn't look like it is the code for version 0.811.</p> <p>I sure would appreciate the help.</p> <p>Regards,<br /> Charles</p> <p>P.S. - The demo at <a href="http://demo.opensourcecms.com/pritlog/" rel="nofollow">http://demo.opensourcecms.com/pritlog/</a> is displaying these errors:</p> <p>Warning: sqlite_query() [function.sqlite-query]: attempt to write a readonly database in /home/opencms/public_html/demo/pritlog/index.php on line 2368</p> <p>Warning: sqlite_query() [function.sqlite-query]: attempt to write a readonly database in /home/opencms/public_html/demo/pritlog/index.php on line 2402</p> <p>And, the RSS feature is not working for the "Subscribe to this page.." icon in the URL, but the RSS Feeds link in the right menu is working. </p> http://hardkap.net/forums/topic/enlightenment-application-launch-error#post-1593 Tue, 09 Mar 2010 22:00:57 +0000 runtt21 1593@http://hardkap.net/forums/ <p>Try using the games name in the terminal, what this means is that the game was made in an older version of puppy and fox 3 does not a lib or something that the game needs. Tring to start it in the terminal will tell you what's wrong. </p> http://hardkap.net/forums/topic/enlightenment-application-launch-error#post-1592 Tue, 09 Mar 2010 16:57:02 +0000 aen 1592@http://hardkap.net/forums/ <p>I recently downloaded a dotpet game file off of the Puppy forum and installed it via PETGET. It shows up in the menu but Enlightenment gives an error message when I try to open it using the menu. Is there any way to correct this? Can the application be launched with another method (i.e. using the terminal)?</p> <p>Thanks for the help in advance </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1591 Tue, 09 Mar 2010 15:07:03 +0000 Prit 1591@http://hardkap.net/forums/ <p>Thanks fastidioso for reporting the bug. I had made changes to Pritlog in how it handles spaces in the tags due to another error that was reported. I will need to figure out the best way to handle it now. </p> <p>Feel free to share your italian translation here. </p> http://hardkap.net/forums/topic/how-macpup-can-work-in-2gb-and-4gb-usb-thumb-drive#post-1590 Tue, 09 Mar 2010 06:27:01 +0000 barryspy 1590@http://hardkap.net/forums/ <p>To share info with all Puppy Linux distros.<br /> Just discovered that Puppy Linux can boot up<br /> successfully with my 8Gb Toshiba USB Flash drive with Puppy Linux,<br /> using current Unetbootln.<br /> <a href="http://unetbootin.sourceforge.net/" rel="nofollow">http://unetbootin.sourceforge.net/</a><br /> Tested with 16Gb usb flash drive but not successful. </p> http://hardkap.net/forums/topic/update-pritlog-0811-problem-with-tags#post-1589 Mon, 08 Mar 2010 22:53:07 +0000 fastidioso 1589@http://hardkap.net/forums/ <p>Hello,<br /> first of all thanks for the wonderful script "pritlog.<br /> I found and manually resolved the following problem:<br /> After upgrading to 0811 tags with spaces, such as "old news", are displayed as "old.news".</p> <p>Thanks again</p> <p><a href="http://www.qua.fastidioso.net" rel="nofollow">http://www.qua.fastidioso.net</a> my site with pritlog (it's a site of friends).</p> <p>Ciao!</p> <p>fastidioso</p> <p>PS: I've also done a translation in Italian, but my English is bad, so do not think it helpful to share:) </p> http://hardkap.net/forums/topic/macpup-42r-wo-enlightenment#post-1588 Sat, 06 Mar 2010 00:07:56 +0000 racepres 1588@http://hardkap.net/forums/ <p>Good stuff!!!<br /> Thanks, I'll let ya know if I learn definitively what is wrong w/ this particular machine..<br /> RP </p> http://hardkap.net/forums/topic/macpup-42r-wo-enlightenment#post-1587 Fri, 05 Mar 2010 22:00:55 +0000 runtt21 1587@http://hardkap.net/forums/ <p>read through this :</p> <p><a href="http://hardkap.net/forums/topic/macpup-061-cd-stops-with-grub-prompt-message" rel="nofollow">http://hardkap.net/forums/topic/macpup-061-cd-stops-with-grub-prompt-message</a> </p> http://hardkap.net/forums/topic/macpup-42r-wo-enlightenment#post-1586 Fri, 05 Mar 2010 18:59:30 +0000 racepres 1586@http://hardkap.net/forums/ <p>Howdy: For reasons way to complicated to get into here,I am Not able to put most "derivatives" onto one PC that I have, [handily at least]. Something about the bootloader, I believe. Anyway, I am wondering if there is/was a Macpup based on 4.2R without enlightenment? This particular machine don't get along w/ e17 either! Or better yet, is there a MacPup repository, so that I can make my 4.2R into macpup? I tried macpup opera 061 and still encounter boot problems from cd. Sure wish that I knew more about the boot sequence.. but on this box, only "official" versions will boot!!!<br /> TIA<br /> RP </p> http://hardkap.net/forums/topic/macpup-foxy-30/page/3#post-1585 Tue, 02 Mar 2010 23:01:10 +0000 verdegal37 1585@http://hardkap.net/forums/ <p>His old solo , in Spanish.<br /> !!IMPRESIONANTE¡¡<br /> Thanks for sharing.</p> <p>Good luck with your new release , if you need anything please tell me.</p> <p>Greetings:<br /> Agust </p> http://hardkap.net/forums/topic/macpup-foxy-30/page/3#post-1584 Tue, 02 Mar 2010 22:15:06 +0000 runtt21 1584@http://hardkap.net/forums/ <p>I hope you like that old solo Agust.</p> <p>Today is a big day for Fox 3 , Macpup Dingo has been out for a little over 18 months, Fox 3 has been out for 3 months and has past dingo in the number of downloads. Very Happy</p> <p>The next version of Macpup is under construction and the base is finished. A new build of e17 is underway. And Yes, the "Fat lady" is going to get to sing again. </p> http://hardkap.net/forums/topic/error-message#post-1583 Fri, 26 Feb 2010 21:40:07 +0000 Prit 1583@http://hardkap.net/forums/ <p>I will take a look at the layout you sent. I am hoping to work on it over the weekend. Will send you an update by Sunday. </p> http://hardkap.net/forums/topic/error-message#post-1582 Fri, 26 Feb 2010 20:55:08 +0000 wnw0031 1582@http://hardkap.net/forums/ <p>Hello .. i went ahead and sent the files... i've condense it quite a bit... to save file size. what's your turnaround time. </p> http://hardkap.net/forums/topic/error-message#post-1581 Fri, 26 Feb 2010 18:43:05 +0000 wnw0031 1581@http://hardkap.net/forums/ <p>i will do that.. </p> http://hardkap.net/forums/topic/error-message#post-1580 Fri, 26 Feb 2010 18:31:46 +0000 Prit 1580@http://hardkap.net/forums/ <p>If you can send the css and image files for the template also, it would help me test the template before sending it to you. </p> http://hardkap.net/forums/topic/error-message#post-1579 Fri, 26 Feb 2010 17:55:46 +0000 wnw0031 1579@http://hardkap.net/forums/ <p>ok.... Can i send over the weekend....I already have the layout coded... but it has includes and css. </p> http://hardkap.net/forums/topic/error-message#post-1578 Fri, 26 Feb 2010 17:47:29 +0000 Prit 1578@http://hardkap.net/forums/ <p>If you have a website layout in mind, just send the layout files and I will convert it into a Pritlog template. There is no fee. </p> http://hardkap.net/forums/topic/error-message#post-1577 Fri, 26 Feb 2010 17:15:54 +0000 wnw0031 1577@http://hardkap.net/forums/ <p>i just tried 7 and 8... those didn't work.</p> <p>4 worked but didn't like the layout</p> <p>is there a fee to create the template and what is the turnaround time </p> http://hardkap.net/forums/topic/error-message#post-1576 Fri, 26 Feb 2010 16:58:25 +0000 Prit 1576@http://hardkap.net/forums/ <p>Can I ask why you don't want Pritlog to run by itself? If you just want to integrate Pritlog as part of your website, you can create a Pritlog template (I can help), that matches your website. This way you can run the latest Pritlog code and still have good integration with your website.</p> <p>I know that Pritlog 0.411 was used by someone the way you tried. Maybe Pritlog 0.7 or even Pritlog 0.8 will work this way. I have never tried out this method. </p> http://hardkap.net/forums/topic/error-message#post-1575 Fri, 26 Feb 2010 15:43:45 +0000 wnw0031 1575@http://hardkap.net/forums/ <p>Yes.. i can run it ant the installed location.. But i can't use it like that.</p> <p>which of the earlier versions can be called using includes... and how do you change the overall size.. i need for the blog to be 600px wide.. i gues 400 for the content.. and 200 for the nav..or something like that. </p> http://hardkap.net/forums/topic/error-message#post-1574 Fri, 26 Feb 2010 15:25:38 +0000 wnw0031 1574@http://hardkap.net/forums/ <p>I don't want it to run independently. I want it run within a site.<br /> Do you know of a way I can do that </p> http://hardkap.net/forums/topic/error-message#post-1573 Fri, 26 Feb 2010 15:12:24 +0000 Prit 1573@http://hardkap.net/forums/ <p>You may not be able to call Pritlog code from other pages using "include". This is because of the way the themes have been created. Some earlier versions of Pritlog could be used with includes. But, the recent versions cannot. </p> <p>Are you able to run Pritlog at the installed location? </p> http://hardkap.net/forums/topic/error-message#post-1572 Fri, 26 Feb 2010 10:52:30 +0000 wnw0031 1572@http://hardkap.net/forums/ <p>I'm calling the blog to my page which has been configured on my server. I'm calling it by using the following code.</p> <p>&lt;? include("../seminars/index.php")?&gt;<br /> I'm getting the following error Message:</p> <p>Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/wnw0031/public_html/f_site10/inc/seminar.php:9) in /home/wnw0031/public_html/f_site10/seminars/index.php on line 36<br /> Your config file does not exist </p> http://hardkap.net/forums/topic/wireless-will-not-allow-encryption#post-1571 Mon, 22 Feb 2010 22:38:26 +0000 runtt21 1571@http://hardkap.net/forums/ <p>Sorry but i have never used wireless, I am afraid I cant really help you with this. </p> http://hardkap.net/forums/topic/wireless-will-not-allow-encryption#post-1570 Mon, 22 Feb 2010 19:48:15 +0000 deenail 1570@http://hardkap.net/forums/ <p>I have an Omnibook 6000 w/ 256mb ram 750mHz processor and I have been attempting to get the WEP to work with a Belkin Wireless G plus MIMO. If I leave the network Open everything works with no problem, however as soon as I enable encryption MAC cannot connect to the network even after I give it the key. Any help is appreciated and welcome and thank you in advance for your assistance. </p> http://hardkap.net/forums/topic/macpup-foxy-30/page/3#post-1569 Sun, 21 Feb 2010 23:46:30 +0000 runtt21 1569@http://hardkap.net/forums/ <p>Thank you. Check this out,It's very old ,1995. I am a bit out of tune, The video is bad and the sound is worse but you get the idea. Watch the whole thing.</p> <p><a href="http://www.youtube.com/watch?v=hTttFhqDhjE" rel="nofollow">http://www.youtube.com/watch?v=hTttFhqDhjE</a> </p> http://hardkap.net/forums/topic/macpup-foxy-30/page/3#post-1568 Sun, 21 Feb 2010 22:27:55 +0000 verdegal37 1568@http://hardkap.net/forums/ <p>Wow!!!runt(Carlos Santana) Let me congratulate , you good with guitar , i like!<br /> Thanks.<br /> Greetings.<br /> Agust </p>